The Jalopy Journal
I use mastercoat rust remover/ metal prep with zinc which is the old Captain Lees formula. And then I followed up with the mastercoat permanent...
Greg, A plant sprayer should work , if it doesn't work go to Harbor Freight and get an engine cleaning gun from Taiwan for ten bucks and you can...
There are rust removers that contain zinc and do not require a water rince. I've been treating seams like this and after 20 years with this method...
If you're looking for a coating system to combat salt corrosion this video should help How to PROPERLY Paint Over Rust Part 2 of 2. Applying...
A salt fog test demonstrates that moisture actually penetrated the epoxy primer. a few years ago on another formum someone asked that they had put...
I use rage gold on my projects. The gallon of Bondo I used on my van. Here's the beauty of it once I put down My primer and then any kind of...
[IMG]
Panel number 4 had a large blister in the middle Number two and number six survived the test. These panels will not be rinsed off they will...
Panel number 3 had two coats of epoxy primer, Bondo was applied over it followed by another coat of epoxy primer over the bando. Number four is...
YES
Sorry for the confusion this was going to be a video but I've got tired. Number one is the zinc phosphate epoxy three coats over a slight bit of...
[ATTACH] This is a 28-day salt fog test. I used the Bondo brand body filler on bare metal , over epoxy zinc phosphate primer , and the aluminum...
https://www.fluoramics.com/how-to-construct-an-inexpensive-salt-fog-chamber/
My epoxy primer arrived today TCP zinc phosphate primer. I've noticed a lot of threads about body filler over bare metal over epoxy,over metal...
Separate names with a comma.