The Jalopy Journal
Did not pull the manifolds, bought the correct spring compressor instead. Just about have my valve puller welded up. Family/Electronic...
Yeah someone has to do it, and not to many people do. So I try to welcome a few who have had 0 replies each day so they will post further. If they...
Is the tool that you have a slide hammer type that hooks under the valve head? I set out to make a slide hammer valve puller but was worried about...
Good point on the dremel, I AM going to have the valve bay clean as a whistle before I am done tho, still, the dremel is out...Yeah I would love...
You sound like a H.A.M.B.er to me! Welcome!
Glad that you finally joined!
Well then you have hit the right site! Welcome aboard!
Hi there Jerry, Welcome to the H.A.M.B.! Steve
Welcome to the H.A.M.B.! I would drop it, flush it with water, put a few feet of chain it there and shake the piss out of it and rinse with water,...
Yeah I got my post count fair and square;)! Not one of these guys that just goes and posts one word replies on EVERY thread. I got a good 20 just...
"Try putting a piece of wood, plastic or aluminum between the valve and lifter and turn the engine over." I like this one! Good stuff, thanks!...
Squirrel, what's up man!? No, this is one of the "un-stuck" ones. I figured that I would start with a few of those so that I would know how hard...
So what is the best way to get these bastard valves out? I put corks in the drain holes (even the 2 small hidden ones) started with a valve that...
You sound like a H.A.M.B.er to me! Welcome aboard!
Got it, bout to go see what I can tear up!
Separate names with a comma.