The Jalopy Journal
More of a diagonal line from the plug to the lower ball joint. The set back from the top ball joint to #1 is about 10 1/2".
19 1/2" if I run a tape from the base of #1 to the top of the lower ball joint.
Here's what it looks like with the springs out. They're 13" long, 4 3/4" OD and 3 1/2" ID. Don't have calipers, but coils look to be 5/8" diameter.
I think we have a winner. Could I use schedule 40 and make a sleeve for each shock? I could set the control arms closer to where they should be...
I know, but I thought it may move a bit with engine installed. It didn't. My neighbor and I stood on the cross member last night and tried to get...
Here's what it looks like with the wheels on the ground. My neighbor and I can stand on the cross member and nothing changes. I loosened up the...
I've looked at old threads until I'm about blind. This is what my front suspension looks like. The engine and trans are in. I took the wheel off...
Frame webbing it is! Never heard of it before. Thanks!
Drive train will be a SBC w/700R4. The frame has a drop axle x member, but that's going to be replaced by a Heidts MII with 2" dropped axles. The...
First of many questions! My '34 Ford frame is headed to the local rod shop for suspension. When I put the body back on, do I use some kind of...
Separate names with a comma.
The Jalopy Journal
