The Jalopy JournalOutback's Recent Activity
-
Outback liked NealinCA's post in the thread Projects Building My First Roadster in San Francisco.
The chrome "big nuts" on my 5w... [ATTACH] Plus the 3 different varieties Ive seen. Far right, Model A up to 34 I think Middle...
Jul 11, 2025 at 2:04 AM
-
Outback liked richard noble's post in the thread Projects Building My First Roadster in San Francisco.
Joey, those are reminiscent of the old EELCO racing nuts, back in the 50’s. This is a photo of an original pair. They were used for...
Jul 11, 2025 at 2:04 AM
-
Outback liked Jeff34's post in the thread Projects Building My First Roadster in San Francisco.
I have the 15/16” on my ‘40 rear. I bought new felts and one new washer (missing)
Jul 11, 2025 at 2:03 AM -
Outback liked NealinCA's post in the thread Projects Building My First Roadster in San Francisco.
The 15/16" hex were used pre-war, the 1-1/4" hex were post war and became popular with hot rodders, as they were heavy duty. I use them...
Jul 11, 2025 at 2:03 AM -
Outback liked Deeluxe's post in the thread Projects Building My First Roadster in San Francisco.
Re: Parts. Old is Gold. Your rod is becoming rad. Thanks for these posts along the way.
Jul 11, 2025 at 2:03 AM -
Outback liked Tim's post in the thread Projects Building My First Roadster in San Francisco.
Man that’s waaaaay off!
Jul 11, 2025 at 2:03 AM -
Outback liked J.Ukrop's post in the thread Projects Building My First Roadster in San Francisco.
Thanks for the wheelcover advice, guys! No big updates from the 5R bus this morning, but here’s a little comparison between the...
Jul 11, 2025 at 2:03 AM
-
Outback liked Deutscher's post in the thread Projects 4BANGER mild HotRod.
Yes it's original. The Brake Shoes were adapted to the brake drums. [ATTACH] [ATTACH] Greetings Harald
Jul 11, 2025 at 2:02 AM
-
Outback liked Moriarity's post in the thread History The Deora Deviation.
I tore this place apart because I was sure that I had one of those Chrysler Deora concept car brochures. Then it dawned on me that I...
Jul 9, 2025 at 11:21 PM
-
Outback liked jivin jer's post in the thread Features T A I L D R A G G E R S..... again....
Juniors '50 (again).[ATTACH]
Jul 9, 2025 at 8:47 PM
-
Outback liked Deutscher's post in the thread Projects 4BANGER mild HotRod.
My spindle bushings are reamed and mounted with new bearings that are shimed, [ATTACH] [ATTACH] [ATTACH] the rear drum plates are...
Jul 9, 2025 at 8:46 PM
-
Outback liked Tim's post in the thread Projects Timm builds a model A.
Sometimes I just chalk it up to “shit happens” got the cross member welded up! I’ll grab some pictures when I get it home :)
Jul 9, 2025 at 8:45 PM -
Outback liked Tim's post in the thread Projects Timm builds a model A.
I used a tin foil turkey pan to do a license plate once and it leaked and left a nice rust streak across the driveway. Now I use five...
Jul 9, 2025 at 8:44 PM -
Outback liked Six Ball's post in the thread Projects Building My First Roadster in San Francisco.
I have 15" Olds caps on my pickup. 3 fit fine. The spring clips on the other is are a little different and it is a bitch to get on. Tens...
Jul 9, 2025 at 8:44 PM
-
Outback liked winduptoy's post in the thread Projects Building My First Roadster in San Francisco.
we aren't so concerned with them being stolen..and yes they are nice! they have honest use and add tremendously to the look!!... it is...
Jul 9, 2025 at 8:39 PM
