The Jalopy Journal
I built a fabricated quickchange. http://www.jalopyjournal.com/forum/showthread.php?t=415472 I had at least a solid week building it. If you...
Go to weldingweb.com They have a pretty active classified section and you might find something in your area.
That's not what you want. That's basically the same circuit they use in all the cheap narrow band O2 gauges. A wideband controller has some...
You will be surprised to find out how far off you are when you think you have a well tuned carb. I have a TechEdge which will data log and also...
Two words of caution when you get one. Never leave it in the exhaust pipe without the controller connected and powered up. Leaded gas will...
Found this really cool turboed Y block when cruising the Megasquirt forum. http://www.msextra.com/forums/viewtopic.php?f=104&t=46823
Guess its kinda like the dumb asses that do the same things to cars.
My son is the crew chief on the Precious Metal P51 Mustang.
I put an O-ring on mine and have had no leakage problems. I think I would use six bolts like a Halibrand cover. You have to figure that the bolts...
Lucked out on that one. I had to spend $300 for some cut to length axles.
When I made mine I machined all the bearing bores after I had welded it. this eliminated all the distortion problems. Must have worked pretty...
That is pretty much how I did it on my homemade quickchange. If I recall, I turned down the shoulders on the side gears so I wouldn't have to...
Where do you live in Johnson Co. I live in Goldsboro and if you run out of options, I may be able to help you out.
There is a Jones 2:1 right angle drive on E-Bay for 27.85 + shipping. Item # 251007555072.
Separate names with a comma.
The Jalopy Journal