The Jalopy Journal
sooooo....I read that it goes in the exciter wire. Cool, but does the diode get installed in that wire in front of or behind the 194 bulb?
So....See my Avatar which is what I'm working on setting up a new chassis for it. Everything is at ride height and suspension loaded. If my 9"...
Thanks 31Vicky...my floor substructure is pretty tight above the tranny so very little to no spare room to move on the 4 * down tranny angle...so...
So.....I'm rebuilding my car in my avatar after a wreck a couple years back and stuck a deuce frame under it this time. 30" rear tires. Driveshaft...
nice piece....but please explain how this relates to the cruise control issue being discussed.
Interested in how you hooked up your brakes to turn off, and the switches connection to this unit. Got pics or a diagram?
DUNN
well....I've got a 66 Toronado tilt/tele without the integral ignition key. Anyone on here know what ..or if...an aftermarket steering wheel is...
What parts do I need for a homemade cruise control on the car in my avatar... Like out of a junkyard, not the expensive amkt catalog stuff....
HELP!!! What have you found or are using to seal up the gap left in the slot where the brake pedal arm passes through the sheet metal floor on a...
Looks good...I'm facing the same issue...did you pie cut your firewall to spread it so the cowl sides clear the outside of the frame rail? My...
. Early '30 gastanks had [3] raised reveals, they were about 3/8" long to retain the cowl band... the later '30s had them about 1.25" long...
Back to the top.... Sent from my iPhone using H.A.M.B.
Separate names with a comma.
The Jalopy Journal