The Jalopy Journal
Met Dale Velzy many years ago, probably mid 90's. He had a red ~34 Ford pu sitting outside his fence, visible from the road with a for sale sign...
Have a similar application, 401 Nailhead in a 32 frame with BW 4 speed. The hydraulic to bearing liked to leak. That was originally used because...
Do any of the available kits locate the split wishbone ends in the correct location by the trans where the perches don't need to be heated and bent?
Support the Alliance Vendors here; check out the very last vendor on the list. Their website has good information on this subject.
Stopped there 2 weeks ago and the museum is quite amazing. From the 3 floor museum there are windows where you can see in their machine shop. It...
Chrome is very user friendly, classic car coverage through American National, one of the oldest insurers in the US.
Thanks ^^^^^That's pretty sad that foreign replacement parts are that inferior! The gap was at least 1/8".
Had the emergency brake problem on another vehicle at one time, this one is not causing a problem. Opening up the slot in the shoe to get the...
Barracuda w/o the rear glass.
There was no pressure at the wheel cylinder when the bleeder screw was opened. there is a return spring on the brake pedal and there is some play...
Will investigate your good suggestions! More minds are better than one! TY
Have been chasing this problem. The guide plate was not in the correct position and when fixing that, noticed that the shoes are not seating on...
Do the titles usually include the 18 prefix?
TY all for the replies! The original drivetrain is long gone so no numbers available there. As others have mentioned, the 18 preceding the...
Separate names with a comma.
The Jalopy Journal