The Jalopy Journal
Thanks for the advice guys. I did a little diggin on all par site and found out that there may be a tool for an adjustment screw. It said it was...
And just out of curiosity, does anyone know why the car will go in reverse and the brake does not lock, but when it goes forward it locks up.
Does this adjustment disengage the brake drum.
My Chrysler has been sitting for a few years and the rear wheel brakes are all locked up,we pulled the car out of its parking spot backwards (in...
I'm also going to keep up with this thread.I haven't been doing alot of anything with my cars except grabbin up parts.I need to start getting it...
Hey I'm Nada and I am working on a 54 windsor! I sure could use alot of pictures of your engine bay! If you have the time would you take pictures...
Just curious if you ever decided? Did you pick up the New Yorker?
Sorry I just sawthis post...I do have a shop manual for 1954 for future reference! 55 too!
Ok guys I really need your help!I have two! One is on my 56 354 and I don't know if it is the right one!I also have a 331 and the thickness on...
The one presently on the motor is 3/4 inch
Would this cause the starter problem?I was thinking about taking off the adapter plate from the 331 and putting it on the 354 with the starter as...
Is there a difference in the stock adapter plates through the years? I have a 55 331 hemi and a 56 354.The plates on the two motors have different...
Thanks guys! Got a 55 to so the 55 diagram is very helpful.
Separate names with a comma.