The Jalopy Journal
I love making custom headers/exhaust. Best way to make your car unique. Nice work.
Out on the Siletz River
Thanks for the tutorial. No wonder my stainless flares have been less than perfect. Good luck with them!
Well done. Motivating I hope.
1st class build. Good luck with your inspection.
Typical hot rod, always improving!
A couple of other things needed attention. I had 1" lowering blocks on the car. When removed, I found cracks and mis-shaped holes where the spring...
Here's a look at the drive side[ATTACH]
Looks like a good start. Have fun!
Yes, of the few original parts that came with the pile of parts I started with. 8.2" ten bolt. I think all full size Chevys 55-64 came with this...
Here's the pinion holding tool I built.
And a shot of it in place. I used a 6 foot piece of pipe for a cheater with my 3/4 drive...
I built brackets to bolt the housing to my bench, built a wrench for tightening the side bearings, and a 'pinion holder' to help installing the...
Always happens, I expect it now. I decided to add positraction to my car, something I've wanted to do for as long as I've owned it. So...
Me neither, internet pik
Separate names with a comma.