The Jalopy Journal
Absolute perfection as always, Neal. A pleasure to see it.
Thanks Dave. Here's the latest. Mart's Old 57 T-Bird Pt8! Vac Advance hooked up! More Progress! (Mart's Update 2422) In this video, I show...
Mart's Old 57 T-Bird! Reinstating the choke and Four Barrel Road Test! (Mart's Update 2421) When I first got the T-Bird running over 30 years ago...
I didn't know there were two different lengths of link. Thanks for the thread and glad you have it running right. Mart.
I built my 32 sedan with an F1 box. I used a 32 pitman arm and stock 32 spindles. The steering is a little "slow" so is better with a steering...
57 T-Bird Pt6! It runs on 2 barrels. Will it run on 4? Plus remote start and Ruby! (Mart's Update 2420) When I first got the T-Bird running over...
I use 8BA type thermostat housings and put the temp sender in the tapped hole near the centre of the heads. The outlets are 1-1/4" so some hose...
Sit down and listen carefully. What I am about to explain takes some understanding. When I built the 312 in my T-Bird I did not do anything with...
Thanks Dave. 57 T-Bird! Back out on the road! Running good! 2 barrels for now, 4 to come! (Mart's Update 2419) When I first got the T-Bird running...
I can only add some observations from refurbing the original Holley carb on my 57 T-Bird. This is a factory original fitment and the first year of...
57 T-Bird! Why can't I get it to run right? Still trying! (Mart's Garage Update 2418) When I first got the T-Bird running over 30 years ago I...
57 T-Bird! Can I get it to run right? (Mart's Garage Update 2417) I got the Thunderbird running, but wasn't happy with some mods I did over 30...
57 T-Bird! Dealing with Door Fit Issues! (Mart's Garage Update 2416) While fitting the tread plates to the T-Bird I realised I was not happy with...
57 T-Bird! Will it run? Will it move? Will I wash it?! (Mart's Garage Update 2415) Having done what I can on the 100E I wanted to rearrange the...
If the pistons are stuck, the crank should move just a little bit back and forth. If the cam is stuck the crank should still move a little bit....
Separate names with a comma.