The Jalopy Journal
If you look closely at the drawings in the origional post the forward lining is full length and the backside lining is about 2/3 of the shoe.
O.k. so I have later brakes. Thanks.
My brakes don't have the bottom adjustment so I guess I just adjust the top as in the minor adjustment instructions?[ATTACH]
That would be great. Thanks.
I have this thread saved for the water pump assemble information but can't see it properly.. Just putting my pump back together and need to know...
Still havn't got to the body but here are the bits I cut out of the crossrails.[ATTACH]
Here's an older pic I found on my phone, Il'l take some more but this gives you the general idea.[ATTACH]
Yes it looks like your rear bits are the right ones. Il'l get some pics for you.Body is in the corner at the moment while I'm finishing the...
I had a similar thing with a standard coupe I bought that had been pieced together. The tudor floor frames are the same width at the cowl and...
I'd probably work from body mount holes.
Looks like one of those Posies springs. They are made for 44" hanger centres.
Yes Model A axle. That's an old picture. I have since reversed the spring and added shocks.
You need to use a stretch drop with mechanicals, the aftermarkets are too narrow. [ATTACH]
Yes they do. Just checked where I worked it out back when I did mine,1 1/8" each side .Have a look at he mechanical backing plates and you will...
Have someone strech drop a model A axle for you. It looks like you are running mechanical brakes. Be aware i f you intend going to hydraulics it...
Separate names with a comma.