The Jalopy Journal
There's a TON of ''how-to's'' on you-tube and other sites.
Dolly work, body filler, sand-80-120-320 , primer, sand -320-400 , 4 coats of paint...
What if you took the sed. bowl off and ran a line direct from the tank ( hose barb fitting?) ? That would eliminate the bowl as your problem.
Or just use the 1157 and 'burn out' the brake light filament .
Nice! Any more pics?
We always ran Dawn dish soap thru a radiator that was dirty/oily, say after an oil cooler leaked.
3 years ago I was looking for a 35-37 Chevy, when I found a 39 coupe 60 miles from me.
Still a ''work in progress.''
Easiest solution is to rent a compressor, or You COULD roll it on. Stop laughing you guys. I rolled on my avatar due to certain circumstances...
Very informative thread!
I scarfed a fuse panel out of a junked modern Jap PU, there's #10 and #12 wires coming in, but going out it's mostly #18...
Tons of good info in this thread.
From owners manual.
Do you have the park lights in the front grill? I turned mine into turn signals
Should be, #1 - tail lights + dash lights, and park lights...
What about a headlight bucket?
Separate names with a comma.