lucky ink's Recent Activity
-
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] After the cowl work, I’m onto the back window and corners.
Apr 24, 2024 at 8:29 AM -
lucky ink liked Fogger's post in the thread Technical Hard chop: sitting on the chopping block.
I used a '65 Mustang Coupe roof top when filling my 3W. I did get some flack but the Mustang was a total and using Ford sheet metal on...
Apr 24, 2024 at 8:28 AM -
lucky ink liked flamedabone's post in the thread Technical Hard chop: sitting on the chopping block.
Some Mustang guy is gonna be mad at you. -Abone.
Apr 24, 2024 at 8:28 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I cheaped out and used a “Henry Ford Steel” roof insert.
Apr 24, 2024 at 8:28 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] And with the roof panel sitting on. Next will be the other corner and the roof.
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I scribed a couple alignment marks then removed the corner. Trimmed it with snips...
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] [ATTACH] [ATTACH] Test fitting the corner back in. I moved it around until it flowed with the top just right. I’m happy with...
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] [ATTACH] [ATTACH] Then tack it in to the roof to lock the pitch it. Clean the corner openings so I can scribe them to fit.
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] Next set the back window pitch to 82.2 degrees, same as the B-pillar pitch.
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] Continuing with the back window. Finished tacking the seam.
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Now Is the perfect time to weld up the roll bar. Would be nearly impossible to get...
Apr 24, 2024 at 8:27 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] [ATTACH] [ATTACH] Back on the rear window now. I cleaned the cut on the upper half of the window. Used Dykem fluid on the lower...
Apr 24, 2024 at 8:26 AM -
lucky ink liked 65standard's post in the thread Technical Hard chop: sitting on the chopping block.
[ATTACH] Finished filling the cowl gap
Apr 24, 2024 at 8:26 AM -
lucky ink liked clem's post in the thread Technical Fenderless 32 W/Rear Frame Horn Covers.
[ATTACH]
Apr 22, 2024 at 6:57 AM -
lucky ink liked clem's post in the thread Technical Fenderless 32 W/Rear Frame Horn Covers.
I just took mine off as they, in my opinion, look a little bulky, and will fill up with dirt from the tyres flicking stuff up. I am...
Apr 22, 2024 at 6:57 AM