The Jalopy Journal
Squirrels right you gotta remove the fuel pump rod.
I think your perlube idea will work ok, but I would really think about it before I pressurized an old garden sprayer with shop air.Those old hand...
Thanks for all the answers guys. I have purchased and installed a fusebox that was exactly what I had in mind. Car is back on the road and all is...
The car was wired with 8 fuses because of extra accessories, electric fan,fuel pump, a/c etc so the extra circuits are needed but thanks for an...
Thanks for all the input.Found what I needed at Speedway Motors.I think the brand name was Painless also found some good looking ones at Centech.
F&j is right I can't use an original because of the harness swap or I would certainly put an original one in. The car is already modified so...
I am looking for a good quality fuse box for a 56 chev.The car has had a wiring kit installed at sometime(dont know the history) but the fuse box...
The plugs should not normally be wet what is being said is if they are wet its another confirmation of too much fuel or not enough fire to fire...
A few things to check are the carb of course,make sure the plug wires are in the right firing order, check for good strong spark at the plugs,make...
If you still dont find the problem after all the above mentioned checks look at the keyway in the front dampner.I had one break out on a sbc last...
If I remember correctly the left front cylinderis #1 on a sbc not the right as previously posted
btt
Don't beat the hub down with a hammer or you will ruin the seal.If you must move the hub use a press and support the shaft on the other end,also...
Welcome from Cozad Ne.
Separate names with a comma.