The Jalopy JournalKerrynzl's Recent Activity
-
Kerrynzl replied to the thread Technical Rebuilt 302 has no get up! Help..
He said he put longer pushrods in with the flat tappet cam. [this cannot be done with roller lifters] My interpretation, is he pulled...
Apr 18, 2024 at 6:25 PM -
Kerrynzl liked Budget36's post in the thread Technical Rebuilt 302 has no get up! Help..
I think he corrected himself on the CC size. They are 60cc as I recall, but not 72?
Apr 18, 2024 at 6:14 PM -
Kerrynzl replied to the thread Technical Rebuilt 302 has no get up! Help..
Do one thing at a time ! Gears is a good starting point. Before you rip the engine apart , give it a compression check ,and a vacuum...
Apr 18, 2024 at 3:50 PM -
Kerrynzl attached a file to the thread Technical 64 283 rebiuld.
It is easy to make a "348" stroker from your block because it is already 0.030 oversize bores. The secret is the accumulation of the...
Apr 18, 2024 at 3:31 PM
-
Kerrynzl replied to the thread Technical 64 283 rebiuld.
I was hoping it was the 3789817 casting for your year car In 1964 this ^^^ block casting was used for both 283 and 327 engines. So it...
Apr 17, 2024 at 9:35 PM -
Kerrynzl replied to the thread Technical 64 283 rebiuld.
What is the casting number on the block?
Apr 17, 2024 at 6:21 PM -
Kerrynzl liked Vic Walter's post in the thread Technical 64 283 rebiuld.
Those big pipe plugged holes on either side of the cam were to allow the sand casing core (water jacket space) to float within the sand...
Apr 17, 2024 at 3:15 PM -
Kerrynzl replied to the thread Technical 64 283 rebiuld.
Or you can stroke the 283 out to 350 [actually 348"] and leave the stock appearance incl the 283 casting numbers. This would make a...
Apr 16, 2024 at 11:10 PM -
Kerrynzl liked chicken's post in the thread Technical Rebuilt 302 has no get up! Help..
The cam that's in it: "Rough idle, wide midrange power band. Requires 2,500+ stall, 9.5:1 and higher compression, and gearing. Bracket...
Apr 16, 2024 at 6:04 PM -
Kerrynzl replied to the thread Technical Rebuilt 302 has no get up! Help..
He would be doing 1398 rpm at 65mph with 2.73's ................and with that cam ??????? Here we are pulling our hair out trying to...
Apr 16, 2024 at 6:02 PM -
Kerrynzl liked anthony myrick's post in the thread Technical Rebuilt 302 has no get up! Help..
Those gears and OD some 3:73s would help
Apr 16, 2024 at 5:25 PM -
Kerrynzl replied to the thread Technical Rebuilt 302 has no get up! Help..
That makes a difference.[now getting the correct info] Now what do you want to use the engine for? Daily driver? Street Strip? This...
Apr 16, 2024 at 3:24 PM -
Kerrynzl liked oldiron 440's post in the thread Technical Rebuilt 302 has no get up! Help..
I wouldn’t buy more parts without trying to optimize the ones you already own! As I said the cam in my 289 works well and it has 228...
Apr 16, 2024 at 3:20 PM -
Kerrynzl liked Mr48chev's post in the thread Technical Rebuilt 302 has no get up! Help..
40 minutes of searching through Edelbrock performer heads for a sbc doesn't bring up any 2.02 heads with 72 CC combustion chambers, How...
Apr 16, 2024 at 4:39 AM
