Register now to get rid of these ads!

junkyardjeff's Recent Activity

  1. junkyardjeff replied to the thread Technical Speeding up the shifting with a 3 on the tree.

    It looks like it has a place to put a pin in the mechanism to adjust so that is where I will start first.

    Oct 24, 2020 at 9:56 AM
  2. junkyardjeff replied to the thread Technical Speeding up the shifting with a 3 on the tree.

    It could be just the way it is but its been many years since I really drove one with a 3 speed on the column.

    Oct 24, 2020 at 8:14 AM
  3. junkyardjeff replied to the thread Technical Speeding up the shifting with a 3 on the tree.

    65 Mercury Montclair which should be the same as a 65 Galaxie.

    Oct 24, 2020 at 7:47 AM
  4. junkyardjeff replied to the thread Technical Speeding up the shifting with a 3 on the tree.

    I really do not want to speed shift it but it just seems like it takes too much time to shift and if I had to take off quick its not...

    Oct 24, 2020 at 7:46 AM
  5. junkyardjeff replied to the thread Technical Speeding up the shifting with a 3 on the tree.

    This one feels sloppy in the shifter so it looks like the column will have to come apart but I will adjust it first and go from there.

    Oct 23, 2020 at 8:37 PM
  6. junkyardjeff posted a new thread.

    Technical Speeding up the shifting with a 3 on the tree

    My Mercury has the 3 on the tree and I was wondering if there is anything that can be done to it so it could be shifted quicker,its been...

    Forum: The Hokey Ass Message Board

    Oct 23, 2020 at 8:05 PM
  7. junkyardjeff replied to the thread Technical 60s Ford 3 speed o/d parts availability.

    Found a couple broken wires at the firewall but still no o/d,wire is good from the relay to the governor so I am going to use a toggle...

    Oct 21, 2020 at 7:54 PM
  8. junkyardjeff replied to the thread Technical what are those hubcaps from.

    Looks like 1960 Ford.

    Oct 20, 2020 at 7:38 PM
  9. junkyardjeff replied to the thread Technical 60s Ford 3 speed o/d parts availability.

    I hope its just a bad connection but if its the governor I might just run a toggle switch until I can find one.

    Oct 18, 2020 at 9:53 PM
  10. junkyardjeff replied to the thread Technical 60s Ford 3 speed o/d parts availability.

    Tomorrow I will see if the wire going to the governor is not broke or have a bad connection or the switch on the gas pedal is the...

    Oct 18, 2020 at 8:48 PM
  11. junkyardjeff replied to the thread Projects 1946 Chevrolet Truck.

    You could use a 48 to 53 bellhousing but there would be no place to mount the pedals,I used a modified 48 to 53 bellhousing that was...

    Oct 18, 2020 at 8:40 PM
  12. junkyardjeff replied to the thread VINTAGE SHOTS FROM DAYS GONE BY! (Part 2).

    This is one place I do not ever remember even though there was one not too far from my house and the building is still standing.

    Oct 18, 2020 at 4:05 PM
  13. junkyardjeff replied to the thread Technical 1961 falcon automatic shifter slop question.

    The collar is made of aluminum and can cause it to get sloppy,

    Oct 18, 2020 at 2:52 PM
  14. junkyardjeff replied to the thread Technical 60s Ford 3 speed o/d parts availability.

    Relay is working.

    Oct 18, 2020 at 1:49 PM
  15. junkyardjeff replied to the thread Technical 60s Ford 3 speed o/d parts availability.

    Was wanting to run some tests but just after I got the brakes adjusted better it started to rain so a project for another day.

    Oct 18, 2020 at 10:33 AM
Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.