The Jalopy Journal
I just kept adding to mine for rigidity. It needs to be stiff up and down as well as side to side. If the rollers walk forward or backward it...
I need to use a pressure type pre lube system to make sure all parts are lubricated prior to starting my engine that has been sitting for several...
Yep, that's pre-floorboards
Mine is not the most robustly built of all the ones I have seen here and other places but I can still put my assembled MGB on it (about 2,000 lbs)...
Thanks. I'll have a look next weekend.
Does anyone know if there are longer e brake cables/housings that will fit into '88 and later C4 Corvette calipers? I would rather not have to buy...
Next time you are at Costco grab some of the separators between layers of paper towels or toilet paper on the pallets. It makes great material for...
Thanks
I used the 12v HF winch motor. The hand control converts easily to a foot control. If you use a 15 tooth sprocket on the winch and a 48 tooth on...
Looks aside, electric fans make more sense than engine driven mechanical fans. Fans create additional airflow through the radiator. You need...
Along the same lines as Jogyver's swing away slip roll stand, I made a rolling stand for my 4' brake. To keep it from moving and tipping over when...
I would use an OEM fan rather than one of the aftermarket ones. The Ford Taurus has a great reputation for a good reason. Another fan similar to...
Thank you however, that one of yours is much better executed. Mine has been sort of an evolutionary process over the past 8 or 9 years and it...
Separate names with a comma.
The Jalopy Journal