The Jalopy Journal
Thanks for the replies! I agree the mechanical pump is the way to go and if it were my car I'd do it. The fellow who owns the car is trying to...
I'm working on a 1950 Canadian Meteor (a Ford with a Mercury-esq grille...) for an older gentleman. Rebuilt 239. The carb looks to be a knockoff...
1935 pickup that I'm working on for Bob, the father of a good friend. Bob has a small fleet of really cool old stuff, but he's not a mechanic. The...
Your description of how it should work makes perfect sense. I looked again at this generator; the "extra" wire is not attached to the adjustable...
Pulled the inspection cover as suggested. There are 3 brushes. one on each side (3 o'clock & 9 o'clock) and one at 12 o'clock. The black wire is...
Further to the above I found a YouTube video with a rundown of the cutout & it's function. That's exactly this generator looks like, except for...
I looked at those diagrams. They were helpful but don't show the exact terminals on the generator. This truck has a firewall mounted voltage...
I got everything together with a new manifold. No fatigue cracks I could see in the pulley, hub, etc. There are no bearings as part of the mount,...
I lurk on the HAMB a lot, but rarely post. Most of my stuff is not HAMB friendly. But at the moment I've got this in my garage. It's just so...
See, this is why I turn to the HAMB when I have tech questions. Lots of information & advice to digest here! For those who asked: I do have a...
I was thinking I had a volume problem...I've tried a couple different guns- 1.3 tip & 1.4 tip. Made next to no difference; granted, they were...
15-20 years ago I did a few garage paint jobs. I had two guns - one siphon feed, the other gravity. I don't recall the gravity gun being marked as...
Separate names with a comma.