The Jalopy Journal
electrolysis is still a problem with dissimilar metals. modern coolant is formulated to be a non electrolyte. in the 60s when we built flathead's...
What he said! plus you will get 10 pounds of lead.
some things to know about casting into plaster molds. 1 plaster gives off water at 300o and at about 1000o. 2 if you mix sand with the plaster...
You can buy flat black in quantities large enough to spray with your Binks.
It's been a long time since I was under the dash of a shoe box, but as I remember the gages are grounded with a separate wire so if there are two...
These two are are single stage flat black. Pogo
I agree, Art should be heard as well as seen.:D
Quite right John! But this is the first one that made it under it's own power. Unfortunately the show is just over.:(
I was delivering some artwork to this gallerey and the director asked me to put my car in the show. pogo
Most people thought so at this one.
My flatty puts out plenty of heat, sort of a 280 cc heater. Now if I could just turn it down in the summer!
Is the Key hot when you try to restart it? an ignition switch that is starting to fail will do that. when you start to diagnose the problem start...
epoxie is the way to go. they have additives that will make the finish as flat as you want. It's what I intend to do when I finish the body work. Pogo
I had a car in the 60s every one called THE POGO WAGON so when I started to build my RPU I thought of it as THE POGONATER
Separate names with a comma.
The Jalopy Journal