The Jalopy Journal
Hudson and studebaker and jeep ran these trans. There are a lot of good discussions on the different boards.
I have been running one for years, on the 49 Hudson. I have not had any trouble at all with it. Mounted in the engine bay , down next to the frame.
Ditto on the AFB.
The use of washers are a must. The use of hardened washers are preferred. The most important thing about going to a alum. head is torqueing the...
Comp. Cams in Memphis, TN. They have blanks and will grind anything you want.
I have read on this forum, there is a alt. out there that looks like a gen. Might do a search and see what you come up with.
I have been running Petronix and copper wires for years on tractors. I have not had a problem with the combo. When I say years, I am talking 15...
If you are wanting torque and a good street cam. The 270 hyd. RV cam is the most common one . Has plenty of torque and will run also.
The easiest way to wake up a 292 is put a 194 head on it. The 194 head is getting harder to find.
The pistons that Karl are referring to are propane pistons. They are the cheaper way to flat tops. The other way is the custom piston makers. They...
Drive it. The more you drive it, the more you will enjoy it.
No high flow pump that I know of. There are improvements that can be made to make the oiling system more efficient. Rods 2,3,4,5, have a tendency...
Check the opening in the thermostat. It may not be large enough for it to cool at the rated temp. Get one with a larger opening. You can bore...
Road trips are exciting. Have a good one and enjoy.
[IMG]
Separate names with a comma.
The Jalopy Journal