Register now to get rid of these ads!

hemihotrod66's Recent Activity

  1. hemihotrod66 liked '29 Gizmo's post in the thread History What has 8 carbs, a blower and a Hemi?.

    Chain driven blower!

    Dec 1, 2022 at 12:33 PM
  2. hemihotrod66 replied to the thread Technical 401 buick manual flywheel.

    Any good machine shop should be able to balance it...I would have the pressure plate and flywheel both balanced...

    Nov 30, 2022 at 10:28 AM
  3. hemihotrod66 liked 1971BB427's post in the thread Technical Lots of SBC build questions.

    Much of what you're considering shouldn't be done at home, unless you've had all the machine tools, and equipment needed to size rods,...

    Nov 29, 2022 at 3:43 PM
  4. hemihotrod66 replied to the thread Technical Lots of SBC build questions.

    On my engine builds if it is just a stock motor I use the stock rod bolts,,,But on performance builds I always use ARP rod bolts....

    Nov 29, 2022 at 10:59 AM
  5. hemihotrod66 attached a file to the thread Gasser/Street Freak front axle pics..

    My old Goat I had back in 1970 while I was in the service....Had a 421 with tripower in it....If I remember the axle came from a Chevy...

    My 1965 GTO.jpg Nov 28, 2022 at 2:44 PM
  6. hemihotrod66 replied to the thread Projects 63 Dodge Polara Question.

    Nope sure can't...If you think you have a rare car please check other sources for more info....There are folks out there that know a lot...

    Nov 27, 2022 at 3:08 PM
  7. hemihotrod66 attached a file to the thread Projects 63 Dodge Polara Question.

    This is the best I can do....The code book is small

    Nov 27, 2022 at 2:12 PM
  8. hemihotrod66 replied to the thread Technical Wheel bearing blues!.

    If the military aircraft that set longer than a month were required to be moved to prevent wheel bearing damage...Setting forces the...

    Nov 27, 2022 at 1:40 PM
  9. hemihotrod66 replied to the thread Projects 63 Dodge Polara Question.

    If your VIN starts with 643,,,,383 2barrel....6432 is 426 max wedge....These are the only 2 motors listed for 1963 Polara 500...

    Nov 27, 2022 at 10:08 AM
  10. hemihotrod66 replied to the thread Projects 63 Dodge Polara Question.

    Nov 27, 2022 at 10:03 AM
  11. hemihotrod66 replied to the thread Technical Wheel bearing blues!.

    Never had a wheel bearing failure in 60 years of driving...The biggest issue with old cars the set is brunelling.....

    Nov 27, 2022 at 8:02 AM
  12. hemihotrod66 replied to the thread Projects 63 Dodge Polara Question.

    The vin number should tell you....

    Nov 26, 2022 at 11:40 PM
  13. hemihotrod66 replied to the thread Technical 235 for my 1950 3100.

    Years back like almost 60...LOL...I put a 54 235 six in my 37 and for the most part it was a bolt in job....Think I had to drill the...

    Nov 26, 2022 at 9:39 PM
  14. hemihotrod66 liked Johnboy34's post in the thread Hot Rods Why is a 34 ford called a model 40?.

    And the model 40 had a serial number prefix *18- o_O

    Nov 25, 2022 at 1:50 PM
  15. hemihotrod66 liked RJP's post in the thread Technical Are there narrow pedal pads out there for early ford pedals..

    why not get appropriate sized washers, weld studs to them then bolt on? Cut and glue rubber to fit. Not everything has to be 1-800....

    Nov 25, 2022 at 10:35 AM
Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.