The Jalopy Journal
Two inch longer wheel studs, bad idea. Adding two inches to the scrub radius, another bad idea.
Speedway has a ton of coil springs, many different makes, diameters, lengths and rates. Hit their website for a look around, you gotta be able to...
Not dissing you 57 Fargo, just pointing out one more thing to be aware of when mixing and matching (mismatching?) brake system components. 50+...
Nope. Some have residual pressure valves behind the brass tapered line seat in the output, some don't. This thread would be a lot shorter if...
The problem might not be your module. Below the rotor is the pickup coil. It's a bunch of wire wound on a plastic bobbin, the two connecting...
I'd start by tossing the Zirgo fan as far as I could. It's not an honest 3000 cfm, look at the current it draws and compare it to a REAL 2300-...
My fave brake light switch. American made, all metal, operated by pedal.[ATTACH]
Like so many other things these days, it seems the problems with pipe threads are with the execution, not the design. I've had brake and fuel...
I have some machine shop chops and have "restudded" a bunch of hubs and axle flanges over the years. It's just about impossible to drill a hole to...
Headed down tomorrow from north of Toronto Ontario. Hope the weather holds, we almost bailed earlier in the week when the weather forcast was for...
You used to be able to plug just about any brand and part number of belt/ hose/ filter into the NAPA website and it would give you an equivalent...
Separate names with a comma.
The Jalopy Journal