The Jalopy Journal
Leaving gibbon around 9:30 with another buddy and looking forward to seeing everyone. Posted using the Full Custom H.A.M.B. App!
Planning on being there! Posted using the Full Custom H.A.M.B. App!
Thinking about going this year and was wondering what kind of turnout they have for the event? There are a few other events going on that weekend...
Here is a 40 Chevy I have been working on Posted using the Full Custom H.A.M.B. App!
well I got a good laugh today I pulled the engine out and started tearing it down got the heads off and all the pistons look fine!! my buddy that...
well I found the problem, I borrowed a bore scope and was able to see part of the top piston ring on the #4 cylinder! looks like I will be tearing...
I haven't solved my knock problem yet but here is where I am at, I have tried taking some timing out and went to a higher octane fuel and I...
wanting to put some different wheels on the truck and am considering a 10 inch wide five window on the rear and a four inch five spoke on the...
thanks for sharing, lots of really cool stuff there
The bearings looked good the engine had some blow by they tried to run synthetic oil from the beginning we did a leak down test and pulled it...
The motor was built a couple years ago but only had about 1000 miles on it so we put new rings and bearings in it
Thanks for the ideas. I will slide under it tomorrow and start from the converter and work my way back
Separate names with a comma.