The Jalopy Journal
Welcome Spira! You have a drop-dead beautiful Mopar and I am glad you have "Poly-Power!" The 318 Poly is a great engine. Take care, Gary Pavlovich
Hotskins, I have a contact in El Paso with a beautiful dual quad Poly intake that has been tanked/cleaned and machined to accept the AFB carbs...
What a great shop and it is full of toys/projects! Let me know if you need any info. or parts to build a HOT-Rod Poly 318. Gary
Your 1957 Poly 318 dual quad intake will fit any 1956-1966 277, 301, 303, 313, 318, or 326 Poly. It was originally used with WCFB carbs as the...
We have a guy here in town, San Diego, that specializes in building 292's. Had Edelbrock cast aluminum heads for this motor if you want to really...
I have a line on a '66 Poly 318 and trans about 150 miles from me; should be around $350 for both engine and trans but I will check if you want me...
64 Ragtop, Glad you are interested in building a Poly 318. I wouldn't pay more than $250 for complete engine and trans out of the wrecking yard...
Chuckspeed, Nice Chrysler Windsor! You are right that the Poly can run. If you obtain the dual quad intake you are talking about, you can run...
David, Thank you for the "welcome" to the HAMB. Sure, anyone can build a big block with tons of torque and HP and I would like the space for in...
Appleseed, Very good! It was 405HP at 5600rpm though and I am building another version with a dual quad and some "improvements." Gary Pavlovich...
Blacksix, Thanks for the welcome and I apologize for putting my distributor in 180 off! Hope to share info. with any of the "Polyheads" on this...
SnoDawg and Blacksix, Read my "Intro." Thought you were interested in Poly motors or Hot Roddin'? Gary
Here is my introduction as per the rules at the end of my post; I am Gary Pavlovich and have a "dedication to the spreading of this tradition"...
I build Poly 277/318 motors and have all the speed parts to make your Poly run like it should; New Poly performance camshafts, New oversize...
Separate names with a comma.