The Jalopy Journal
Make them. You can also set your differential forward or back a little if needed .
You mention your lack of brake knowledge. The tubing is and must be a double inverted flare , NOT a single
Yes , you need to block a passage hole in the passenger side front deck . I’ve got a 3.375 x4 1/8 merc crank , full floaters and 59 style heads ....
49-53 with earlier heads ( 59ab )
I made a set like that . I gave $50 for an old drive on single piston lift from a muffler shop . I made 2 20” high tripods for the front and use...
Make sure the start button is correct and hasnt been changed . Is it still 6 volt pos ground ?
Don’t know if it qualifies, but it’s removable.[ATTACH]
Studebaker, and Chrysler had similar looks .
Thats a new style. Old ones are solid .
Too much block . You can always redrill the bottom block centering hole to move the diff. Back some . If you remove a block you’ll see a hole...
Agree , never ever any internal damage . Plus I noticed in the pictures that blue silicone is present on the bottom of the timing chain cover ....
So , if it was a stud on each end ? How would the shock care .
The bottom bead and point look off from the one thats for sale
Here is a pic of one that’s currently for sale on here , not mine .[ATTACH][ATTACH]
Whole top cover comes off with that one screw. The switch is a piece of copper that hits the contact .
Separate names with a comma.