The Jalopy Journal
Get a grade 8 3/8" diameter bolt about 4 inches long. Cut the threaded portion off and then use a cutoff wheel to cut a slot (1/4" wide I think)...
Thanks Paul.
So, there is a thread from a few years ago that contains some personal information of mine, and it just seems like good practice to not have that...
The oil goes from the number 4 main bearing up to the number 4 cam bearing where a hole drilled in the journal lets oil up to the heads when the...
I am glad he was here with us for a while.
Some of us are wary of buying clean parts, I would leave them dirty.
Need to tell us what year, make, tranny, etc...
This setup was not for fuel injection, but for carbs. The filter is an aircraft unit sold by speedshops as a high performance unit in the 50s and...
Depends on what you want to do with it. It likely had all the unnecessary stuff removed when it was put together, but current rules require the...
That Hot Rod article is interesting. They basically say that the 4-7 swap sometimes does nothing, sometimes makes more power, sometimes looses...
OD ford trannys are really worth that much? I saw one in a junkyard the other day, I knew they are worth a few bucks, but really that much?
"Perfection" in manufactured parts is impossible. All measurements have errors, and they have a finite accuracy and precision. With something...
The A833 is the mopar 4 speed. It originated in 1964 and went through a few different forms into the dark ages (1980s) in trucks and vans. They...
If you check out this picture I boosted off ebay, the standard mopar A833 has a asymmetric bolt pattern. That plate is the stock hemi trans...
Separate names with a comma.
The Jalopy Journal