The Jalopy Journal
i used 8BA truck pumps too. Originally they are staggered. After conversion no more, what i found to be good. You can use them with the original...
[ATTACH] as you can never have enuff light: I guess every body has an old power bank worthless today because it's too small to charge a modern...
that's a nice start
keep us updated!
yes typically thats what they did.
so you are really lucky. Engines like that dont show up that often anymore :cool:
so i would say this is a...
it was made/cast in 87
No this is the rebuild plate. So it was rebuild by french mil in 92 in clermond ferrand.
cylinders are standard, crank- and...
just for the record as its often stated wrong, those arent hours, those are engine revolutions times a factor written on the conto's side.
great that sounds quite easy. Will do so!
thanks for your help alchemy
curved tubes have been cleaned with carb cleaner and fuel passes good
thanks for your great replies. - they´re helping a lot
to answer the questions:
the dizzy (new) is a GM, turned down...
so far so good - here´s the issue:
i can only do idle tests right now, no driving.
45 main jets:
when i turn the shaft on the rear carb, i have to...
Hi guys n gals
i have a little carb problem with my flatty.
i already read and tried a lot but don´t know what to do anymore.
Maybe someone can...
to block its easy with 1/8npt as stated before.
but for lines you might need adapters from npt=>line nut thread.
this is at least what was done...
i have a french flatty in a 28 roadster w original firewall.
here is how i did it.side dizzy from bubba, truck pumps and a small modern gen with...
Separate names with a comma.