The Jalopy Journal
Awesome! With your skill you could design and build your own Roberts Mach I thru VII
Thanks gimpyshotrods, Funny how sometimes everything falls into place and other times you can't get out of your own way. Makes sense i missed the...
Thanks gimpyshotrods, I'll see if i can get it where it goes. Been having thunderstorms here but tomorrows might be better.
Ok thanks Kevin. Washers between motor and trans to see if it quits spitting fluid?
The tc post is worn down, if I put a strait edge on it i'm sure it would show a dip. Thanks DC
I took the tc bolts out and moved it back off the fp and there's enough space for a sheet of paper. Is that enough or? Maybe 1/32
Thanks jaracer
Converter stayed with the trans. Ok, I'll pull it and have a trans guy look at it. Thanks Squirrel, Dale, Kevin and Marty I'll let you know how it...
Yes those dowels are fine and are handy.
dowel pins?
A lot of people like Thrush Hush Mufflers
I didn't check the gap other then it was in and behind the case. I guess I'll take the tc/fw bolts out and push the tc back. Thanks
When I changed the seal it was dripping from the seal, pump was dry. 200 tc had a bit of wear but I thought the seal would hold that. Trans didn't...
I rebuilt an 83 350 to put in an elky with a 2004r (85, had a 305), was spinning fluid from backside of tc so I pulled it, changed the front seal,...
Separate names with a comma.