Register now to get rid of these ads!

F-ONE's Recent Activity

  1. F-ONE liked warhorseracing's post in the thread Hot Rods Stolen - Bonnieville sign.

    We prayed for his soul. That is the proper thing to do and the H.A.M.B does not condone violence.

    Jun 23, 2021 at 12:47 PM
  2. F-ONE liked Lloyd's paint & glass's post in the thread Projects Patch welding tips ......

    Take your time and do it to suit yourself. I butt weld patch panels, sometimes i use my flanger on patch panels in conjunction with weld...

    Jun 23, 2021 at 11:32 AM
  3. F-ONE liked anthony myrick's post in the thread Projects Patch welding tips ......

    Use patterns to dissect each part. [ATTACH] the bad. [ATTACH] the pattern [ATTACH] the new piece installed. Not great pics but...

    D728838B-94BC-4BA2-ABD8-E75458BF7DBF.jpeg 3BF7AE47-14A9-4535-91CA-78246BE00136.jpeg 20622917-9ADB-436F-A8F9-930FB5600587.jpeg Jun 23, 2021 at 11:32 AM
  4. F-ONE liked indyjps's post in the thread Projects Patch welding tips ......

    Good first patch, some feedback if youre interested. See how your joint line pops in and out, the cut on the body was wavy, as you...

    Jun 23, 2021 at 11:32 AM
  5. F-ONE liked FAKKY's post in the thread Projects Patch welding tips ......

    Got this going ... [img] think I will tack the left piece in place .... then take over to bench and cut it like fitzeee does between...

    Jun 23, 2021 at 11:31 AM
  6. F-ONE liked anthony myrick's post in the thread Projects Patch welding tips ......

    Use poster board to simulate the part. It’s cheaper when you mess up. The poster board will tell you how to shape the part. Where to...

    Jun 23, 2021 at 11:30 AM
  7. F-ONE liked Paul's post in the thread Projects Patch welding tips ......

    Try not to over think every step, and don't be afraid of doing it over if you don't like the results.

    Jun 23, 2021 at 11:30 AM
  8. F-ONE liked John Lee Williamson's post in the thread Projects Patch welding tips ......

    Patch it any way you want to, most all of us will be dead and gone before the rust comes back.

    Jun 23, 2021 at 11:27 AM
  9. F-ONE replied to the thread Technical Flat head motor ID.

    CJ2... I have one of those. Mine is a 1947 CJ2A "farm jeep" with a drawbar and rear PTO. It has sat outside for a while and I should...

    Jun 23, 2021 at 12:57 AM
  10. F-ONE liked HOTRODPRIMER's post in the thread Hot Rods Gene Cromer & the Moonlighter - accident.

    This passage is on the column drop panel of the Willy's, it speaks volumes as to what kind of man Gene is. [IMG] Keep praying and...

    Jun 23, 2021 at 12:44 AM
  11. F-ONE liked anthony myrick's post in the thread Technical Wheel/ tire combo suggestions.

    Chrome OE steelies. Spider caps

    Jun 22, 2021 at 12:19 PM
  12. F-ONE liked squirrel's post in the thread Technical C4 trans pops out of park and into reverse.

    the sticker said to use the parking brake....solid advice. You need to rebuild the column, or get a different shifter, or fix the damn...

    recall.jpg Jun 21, 2021 at 5:03 PM
  13. F-ONE replied to the thread Technical ‘50 Flathead… Oil in the starter!.

    The starter issue..... Make sure that you are using the proper size cable. Make sure all the connections are clean and shiny from the...

    Jun 20, 2021 at 2:17 PM
  14. F-ONE replied to the thread Technical ‘50 Flathead… Oil in the starter!.

    I would try some of that aluminum (really it's probably a tin alloy) stick solder stuff, that you can apply with a propane torch. The...

    Jun 20, 2021 at 2:06 PM
  15. F-ONE replied to the thread Technical ‘50 Flathead… Oil in the starter!.

    Is that intake cracked? [img]9A5547CD-F906-4B05-B35A-C676B3DE5F14 by Travis Brown, on Flickr You have to make sure that the vent and...

    Jun 20, 2021 at 1:13 PM
Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.