The Jalopy Journal
Almost time to start on the chassis.[ATTACH][ATTACH][ATTACH] Sent from my LGMS550 using The H.A.M.B. mobile app
Its back on! Remaking the rear cab corners made the buck now we gotta make the part.[ATTACH][ATTACH][ATTACH] Sent from my LGMS550 using The...
Well after many attempts at the tail gate and corners im finally getting somewhere.[ATTACH][ATTACH][ATTACH] Sent from my LGMS550 using The...
[IMG][IMG] From what I can see is the top bar changes the amount of compression on the coilover to be equal to the movement of the longer arm....
Great idea! Sent from my LGMS550 using The H.A.M.B. mobile app
[IMG] After playing around with it a little bit it. I think the purpose is it allowed him to use long arm and still maintain the same spring rate....
go ahead!
I ran across a few pictures of lil johns modified rear suspension. can anyone explain this setup. What a talented guy!
Made a hammer for him to get some shape on the back[IMG][IMG][IMG] Sent from my LGMS550 using The H.A.M.B. mobile app
Well traditionally there built that way but I will have to get the back of the cab further in order to answer that. Thats why I started on the bed...
The flatbed sides have been[IMG] bothering me so Sent from my LGMS550 using The H.A.M.B. mobile app
Material cost is approximately 65.00 per 48"x96" sheet I have used 4 sheets so far. Not including the material in the scrap bin.
A good buddy of mine lent me a vixen file it works very well! Sent from my LGMS550 using The H.A.M.B. mobile app
[IMG][IMG] Sent from my LGMS550 using The H.A.M.B. mobile app
Separate names with a comma.