The Jalopy Journal
Yea but your messing with driveline angles.
Back your weld with a piece of flattened copper tubing. It'll sink away the heat and the weld won't adhere to it. They sell a paddle specifically...
Good luck........around here, motors are easier to find.........bodies are another thing. Might start looking for a different tranny. Granny 4sp's...
Putting my Flathead back together. I didn't pay attention on which way the spiral goes on the crank sleeve when removed. Not sure the correct way...
In the 4 x 4 world they do make/sell adapters the you straight drill the taper to a certain size and press in a taper bung opposite of the...
Mustang boxes can be reversed but you'd have to rework the mount!
Why the change from the '62 chevy slave?
Oh, I see now. Not in your case but aren't they spot welded to the center roof section? Lot of rodders just weld the seam up.
Are you talking about the ones that attach at the bottom of the B-pillar and sorta go on a 45 up to the quarter window?
Nice work on the torque arm brackets!...I scrolled thru 100's of chassis tabs on Epay looking for the ideal one that could be easily modified for...
Good tip on the vise grips on the overhead door track!
Open a tube of caulk and the tip will dry up in short order leaving you trying to unblock it. Hang the tube, still in the gun, tip pointed down....
Everyone has a cell phone.........Take a lot of pics BEFORE taking something apart!
Know nothing about them other than this pic was off the WWW.[ATTACH]
Separate names with a comma.