The Jalopy Journal
Thank you very much. We did figure out that it was the same as the 28-40 Chevy kit that we make, but i know that the BOP cars had all kinds of...
Anybody know how many years of the Pontiac straight axle spindles are common to a 36? Just did a disc conversion for a 36 and was wondering if it...
Would have been nice if you gave us some info on the brake components. I assume you are using the stock chevy brake pedal so my guess is you have...
Thanks rougebeat, muchly appreciated.
I have installed a factory external oil filter on my 55 pickup 235. There was no cartridge in it when I got it so I don't know where or which way...
The Granada calipers are the same piston diameter as a Mustang II, 2-19/32 in. 79-81 Mustangs ran a 7/8 bore m/cyl. unboosted. If you are in the 5...
If memory serves me correctly the B&M Hydro Stick was based on the 4 speed hydro. Had a Corvette back then with one bolted to a 301 small block.
We had been doing these conversions for a lot of years but several years ago we decided to give it up because the spindle exchange got out of...
Get yourself a magic marker and draw some lines the length of the shoes. Put the drums on and take it for a ride. Cycle the brakes a few dozen...
We have remote boosters back in stock. I can tell you from personal experience that they work very well. Price is $275.00 each. 860-872-7046
The easiest way to determine if there is an RPV inthe m/cyl. is to take a paper clip, straighten it out and insert it into the hole in the seat in...
Take a read on our reply to matt2491 on his corvette m/cyl. it also applies to your problem.
Be careful which Chev. m/cyl. you choose, some don't have rpv's because the wheel cylinders in the OEM application had cup expanders in them which...
Separate names with a comma.