The Jalopy Journal
I did get one for my 341 from Contrerras. 282 X .474" with 112 lobe centers. The base circle was very small and I ended up having to mill off the...
I'm getting closer. The plumbing is done and now the wiring is getting done. I know it's not old, but maybe someone will like it I hope.
Got the old Desoto 341 into the car and on the ground. Now for the wiring, paint, and interior.
You could probably make your own by using 6 throttle bodies and an aftermarket injection system like Megasquirt.
I like the idea of rings being too small for the bore. Even if the slugs are correct an if the rings are even just .010" or .020", the ring gap...
Looks badass to me.
Here it is.
I did broach open the slot in my damper for the 1/4" key. Then made a bracket to hold a pointer on 0 once the engine was on TDC. I found this to...
There is a book you can get on ebay on the old hemis. It has a lot of great info. Everything from cranks to valve spring stats. I'm not able to...
I got em from Venolia about 3 years ago. I called about some more the other day and they quoted me $108.00 per slug. Ross also makes em. I got a...
We did some measuring on the 330 and 341 Desotos. The 330 is supposed to be 8.5-1 but actually comes out to about 7.9-1. My 341 was listed at...
I'm with you on those pistons. I got a set of 10-1 Venolias for my 341 Desoto. My neighbor has a 241 Dodge going into a 64 Valiant wagon. He got a...
Separate names with a comma.