Register now to get rid of these ads!

Doublepumper's Recent Activity

  1. Doublepumper replied to the thread Projects Bought A Truck Yesterday and looked at a Sunbeam.

    My bestist buddy had a '60 Alpine we used to cruse around in back in the early seventies. It would use every gear to get it...

    Jun 10, 2021 at 3:20 PM
  2. Doublepumper replied to the thread Customs Sway Bar Tempering.

    I know a guy that took his home made anti-sway bar for his '37 Plymouth pickup to a spring shop, to have it heat treated. Might check...

    Jun 10, 2021 at 2:36 PM
  3. Doublepumper replied to the thread Technical Little tips and tricks for garage hobbyists..

    :eek: You have old panties? o_O You're not wearing them in place of socks....are you?

    Jun 10, 2021 at 1:57 PM
  4. Doublepumper attached a file to the thread Technical Little tips and tricks for garage hobbyists..

    I got tired of my shop vacuum exhaust blowing on everything and creating more dust. Found a plastic cup with a taper to the sides (old...

    vacsock.jpg Jun 10, 2021 at 12:28 PM
  5. Doublepumper replied to the thread Technical Gazpacho in the radiator : 1964 FE 390!.

    Yum! Looks like automatic transmission fluid from here.

    Jun 9, 2021 at 7:32 PM
  6. Doublepumper liked cfmvw's post in the thread Steering wheel.

    How about refinishing it to match the gauge cluster? Just wanted to put the idea out there...

    Jun 9, 2021 at 7:22 PM
  7. Doublepumper replied to the thread Steering wheel.

    Engine turn it....would match the dash insert and cut down sun glare.

    Jun 9, 2021 at 7:22 PM
  8. Doublepumper liked mad mikey's post in the thread Technical Adjustable Vacuum Advance.

    Follow the instructions, test drive and repeat. It may take multiple tests to got it right on. Be patient and see what your engine wants.;)

    Jun 9, 2021 at 5:16 PM
  9. Doublepumper replied to the thread Technical Adjustable Vacuum Advance.

    Perfect! Just the info I needed. Feel much more confident in getting it dialed in now. Thanks guys!

    Jun 9, 2021 at 4:15 PM
  10. Doublepumper liked pprather's post in the thread Technical Adjustable Vacuum Advance.

    Here are instructions for adjustable vacuum advance, near the bottom.

    Jun 9, 2021 at 4:15 PM
  11. Doublepumper liked squirrel's post in the thread Technical Adjustable Vacuum Advance.

    with vacuum disconnected, set timing for around 34 degrees at 2500 rpm or so. Get the idle happy by adjusting the carb. Then connect...

    Jun 9, 2021 at 4:15 PM
  12. Doublepumper posted a new thread.

    Technical Adjustable Vacuum Advance

    Helping a friend do a tune up on a basically stock 350 SBC. He bought a new distributor with an adjustable vacuum advance. I've never...

    Forum: The Hokey Ass Message Board

    Jun 9, 2021 at 1:47 PM
  13. Doublepumper replied to the thread Hot Rods technical alternator overcharging.

    Might want to take a volt reading with a digital meter to get a precise voltage reading. Some regulators will peak out up to 16 volts...

    Jun 9, 2021 at 12:09 PM
  14. Doublepumper replied to the thread Hot Rods Brake system woes.

    If your ratio is close to 7 to 1, it should be fine. You may need a master with a smaller diameter piston. You would loose a bit of...

    Jun 7, 2021 at 4:30 PM
  15. Doublepumper replied to the thread Event Coverage New Swap Meet in the Pacific Northwest.

    http://oregoncoasthotrods.com/calendar/

    Jun 7, 2021 at 2:36 PM
Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.