Register now to get rid of these ads!

dirty old man's Recent Activity

  1. dirty old man liked tombstone's post in the thread home made tools and equipment....

    [ATTACH] [ATTACH] Got a small shop and have keep equipment stored to the side , etc. Got tired of dragging this English wheel around so...

    E8C70EE5-7286-4786-94A0-5B3E3604B0EC.jpeg 52098312-5A1A-4CBA-BDE5-2BF4CEB1915F.jpeg Dec 2, 2020 at 10:42 PM
  2. dirty old man liked Scott's 40's post in the thread Projects A 40 Ford Sedan Deluxe Build.

    By the way, hoisting it like I did hasn't had any effect on it. I was sort of hoping that the doors would get pulled up and into...

    Nov 18 pass door alignment   R.jpg Dec 2, 2020 at 10:22 PM
  3. dirty old man liked Zax's post in the thread Hot Rods Forty Ford Fixer upper.

    Really hope the new owner is a HAMBer and posts up his progress getting this back on the road.

    Dec 2, 2020 at 10:21 PM
  4. dirty old man liked KenC's post in the thread Technical New to me welding process - MIG Brazing.

    Very true, lots of brazing with a torch in my past. Still have some rod and flux on my torch cart. The flux problem was and is very...

    Dec 2, 2020 at 9:03 AM
  5. dirty old man liked cshades's post in the thread Technical New to me welding process - MIG Brazing.

    I tried it this weekend and liked it. it doesnt seem to work for plug welding overlap panels. i have a extra welder that i has replaced...

    Dec 2, 2020 at 9:02 AM
  6. dirty old man liked cfmvw's post in the thread Technical New to me welding process - MIG Brazing.

    First I have ever heard of MIG brazing, but it's an interesting process. I've done a lot of TIG brazing with silicone bronze rod,...

    Dec 2, 2020 at 9:02 AM
  7. dirty old man liked gimpyshotrods's post in the thread Technical New to me welding process - MIG Brazing.

    This is a persistent myth. Filler and primer stick to brazing just fine. It needs to be rough enough, just like any other metal. The...

    Dec 2, 2020 at 9:02 AM
  8. dirty old man liked Scott's 40's post in the thread Projects A 40 Ford Sedan Deluxe Build.

    My older brother, Mark, asked me an innocent sounding question after seeing my last posted pictures: "Interesting looking trunk hinge,...

    Nov 18 trunk opening before #1  R.jpg Nov 18 trunk opening before #2  R.jpg Nov 18 hinge mounts clean-up #2  R.jpg Nov 18 hinge mounts clean-up #3  R.jpg Nov 18 trunk opening hinge bolt holes #2  R.jpg Nov 18 trunk opening after  R.jpg Dec 2, 2020 at 8:50 AM
  9. dirty old man liked tb33anda3rd's post in the thread home made tools and equipment....

    this engine crane was modified by a co-worker. he unbolted the legs from an engine crane and mounted it on top of a pallet jack. it will...

    IMG_1420.JPG IMG_1421.JPG Dec 2, 2020 at 8:45 AM
  10. dirty old man liked Lloyd's paint & glass's post in the thread Technical Valve lash driving me crazy. What am I doing wrong?.

    18436572, in that order, EOIC. exhaust opening, adjust the intake, intake closing, adjust the exhaust. Zero lash, add a half turn

    Dec 1, 2020 at 8:09 PM
  11. dirty old man liked Dog_Patch's post in the thread Projects Dodge This - 1939 Dodge Southeast Gasser Build.

    That’s it for 2020 and will probably go to B/G next season. [ATTACH] [ATTACH]

    00CE085F-94D2-47ED-A3E5-65090C342F10.jpeg DAE38546-1B5F-4FAD-9C8A-E3546A2F00D0.jpeg Dec 1, 2020 at 6:58 PM
  12. dirty old man liked gimpyshotrods's post in the thread Technical Gasoline in 2018..

    Drive it. If you cannot drive it, drain it. The EPA has little concern over all of this, and neither does the petrofuels industry....

    Dec 1, 2020 at 6:37 PM
  13. dirty old man liked slug's post in the thread Technical 283 head gaskets.

    Just checked with SCE and they say no longer available. Maybe in the spring. That's the problem everyone wants to sell you stuff for a...

    Dec 1, 2020 at 12:39 PM
Register now to get rid of these ads!

Archive

Copyright © 1995-2020 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.