The Jalopy Journal
I am thinking of doing a small run of badges and was wondering if there were any interested HAMB members? Badges are $225 USD shipped worldwide.
37 Zephyr 3 window
A couple of pickups that fit the title....[ATTACH][ATTACH]
Just saw this thread.....glad you were able to get the Power Hammer imported. I'm genuinely surprised that there isn't a comparable local...
It was 5 hrs....I gave it a buzz with a wire wheel on the drill. I then used some deoxidine to prevent flash rust. I will epoxy the inside after...
I picked up the top section of a 1000L IBC which fitted the door perfectly. I soaked the door in Citric Acid for a few hours, and gave it a hit...
I started working on the doors. Both will get a full skin, which gives me a chance to clean up the inside. 1 door will need an inner bottom...
Keen to know....
Its crazy where the time goes.... I've drawn up same frame rails and will get them laser cut and I will weld them up. They are 4"-10" like...
Don't think this one has come up yet...but it ticks all the boxes for me.[IMG]
Up
Finally got the pickup out of storage and into the garage. Going to cut 2" out of the roof. It has been chopped previously so getting the sheet...
Bring this back from the brink for some recent 32 Pickups !!!! Let's see em.
post it on here if you can ?
Hey Mercuryguy, I have 32 cab and am hoping to try and make some serious progress this year. The advice given here is very sound, krylon32 knows...
Separate names with a comma.