The Jalopy Journal
Start with a location for the fuse panel.....somewhere easy to get at...then build the bracket to hold it......sort the bundles in the directions...
I went with Yellow top, as it has a deeper cycle. with the car sitting between usage it is supposed to hold charge better
https://www.ebay.ca/itm/Weller-P2KC-Professional-Self-igniting-Cordless-Butane-Soldering-Iron-Kit/282060480295?hash=item41ac1d5f27:g:8q4AAOSwabhUYV...
www.cyclegear.com these guys have some similar stuff
In 1970 , our car club ran a 55 Chev gasser, spindles with spacers...no straight axle.......and it had a 292 six cyl.......so all gassers were...
[ATTACH] [ATTACH] here is my pair......the wife's 38 and my 32.......
Prayers for you and the family, take care of you Dad........
here is a chart for the pan on the bottom. somewhere i have the diagram for a tvr cable on a carb, i would recommend the TCI lock up kit, they...
Here is what i could find for you Jeff... 1948 Studebaker Commander Regal DeLuxe Series 15A Convertible Standard Specifications Original...
I adapted a squirrel cage fan and motor from a late model into the Stewart Warner heater on our 38 Chev, I had to cut a hole in the heater body...
http://techshop.ws/ts_detroit.html How far are you from Allen Park? there is a Techshop there.....it is a machine shop hobby place where you can...
Definitely aftermarket, no factory mirrors clipped on the door edge....... probably very rare..
2L383 Dayton belt, should be 3/8 x 35.5 available at Acklands Grainger.....
here is a basic diagram for an aftermarket switch, just match up the wires to what is mentioned above and have fun.....
https://www.mcmaster.com/#stainless-steel-rivets/=1934c14
Separate names with a comma.