The Jalopy Journal
Two Furdo's made. A real 2 speed like the pictures, and the ever popular 3 speed (starts in 2nd and shifts to 3rd in Dr.) Lo range is 1st gear....
Crazy: I was just showing that the OP's math was wrong. And we do make both powered and non-powered converters for vehicles that have LED...
I think your calculations are incorrect. Let's take the 144ohms and see what you get with 12v. 12/144=.0833 or 83ma. 12x.0833=.999 watts. Quite...
Ok, here goes! I am an engineer and work for a Curt competitor. Here is one of your problems, the brake input must have at least one operating...
What kind of voltage reducer are you using? If it is just a resistor, that is the problem. You need to use a solid state reducer, otherwise the...
YOU NEVER KNOW!
Here is a link to a reasonably priced 6 to 12 volt ISOLATED converter....
Looks like 2 holes could be drilled, but the third not so much.
Depending on what your 12v electric choke draws in current @ 12 volts, you may be able to find a DC to DC module that will convert the 6v to 12v....
My take on this thread is that the C4 has a removable bell housing, which is attractive to swapping engines and transmissions. It also allows a...
Back in the 60's I built a little beeper circuit from a Popular Science magazine article. Back then the popular beepers of today were not...
The one I built works pretty good. Turn left and the left Turn signals come on, turn to the right and right turn signals come on, go straight and...
Here's another possibility, depending on what year the 283 crankshaft was for, you may have a TURBOGLIDE crankshaft. I am pretty sure that the...
1893 bulbs are 12-14volts and will be really be dim with 6 volt system. You need #51 or #55 bulbs.
Powerflite was stronger than a Powerglide and had a really stout torque converter with 2.76 to 1 multiplication. Held up pretty well with 300hp...
Separate names with a comma.