The Jalopy Journal
I put a used fuel pump from my 59 Caddy on my 50 Caddy, no vacuum provision at all. Fits and works fine. Edit: Rock Auto has them : Airtex #713...
This is what the seal with carrier looks like in my 50. Your 59 could use this design or the single large seal. Curly
There are 2 versions of the seal. My 1950 Cad uses CR 18671 seal inside a seal carrier. You remove the seal carrier from the front and then the...
I used an 81 Camaro front end. I didn't do the install, someone else did. Fit fine. Attached are 2 pics, right after the subframe was...
Thanks BigGeorge. I thought it was a 1915-20 model era due to the wood in the A pillars, etc. Dashboard shape is a match for 1930 Curly
I primed my 59 390 engine with a cut off screwdriver shaft and my drill. I had oil psi come up almost right away and oil to the rocker shafts in...
TX-- See my reply on the CLC message board. Curly
At a mine in the Aguila, Az area. Curly
Found this old Buick sitting near a mine in AZ. Obviously used to power the mine winch. Data plate is gone. Can anyone Id the year? Curly
That is a Plymouth, 1950 IIRC. My dad had one like it. Sorry I missed this, I would have enjoyed meeting you guys. I live close by. Another way...
I used an '81 Camaro clip. Fit was almost perfect. The point where the parts were joined is all but seamless. Had to cut a coil off each spring...
I did just about everything on this list to my 59 1/2 ton. It rides better but it is still a rough ride. Best thing I did was polyliner on the...
Check with these guys, I got a quote for $80 to rebuild my fuel pump on my 59 Cad. It would also be alcohol resistant....
Saw these in Cordes today, on the way to Crown King. Curly
I have a 59 390 that came with an AFB. I rebuilt the engine and decided to go with a new carb. I bought a Edlebrock 1406, it bolted right on. No...
Separate names with a comma.