The Jalopy Journal
Problem is solved with new hose from fuel pump to sending line. Thanks
It was #4. It looked old but I didn't think about it since I was running fine before. Wrestling it off the old pump must have busted it enough to...
I recently replaced my fuel pump and had trouble starting. Finally filled up the float bowl through the vent tube and got it running for 30...
I bent the points back to touching and it's charging again. I think it was the corrosion on the points that was the problem. But is it not going...
My battery hasn't been charging lately, and I thought the voltage regulator might be the culprit since I just replaced the generator brushes last...
I had already bought and installed a NOS switch. It didn't work at first. I took out the starter and took it to the local motor shop. The guy...
https://www.ebay.com/itm/Poweready-317-4-Starter-Switch-Dodge-DeSoto-Plymouth-Chrysler-SW2813-15-43/332651505875?hash=item4d739328d3:g:yoAAAOSw8GtZ...
I had some problems starting my 47 dodge about a year ago. Got the starter checked out and they said some wires were crossed and they fixed it and...
Thanks for all the help. Apparently I didn't sufficiently tighten the ignition coil lead wire when I installed the new one. It was loose, which is...
I'm not getting any voltage between ground and any of the terminals on the ignition coil. The key is turned on. Not sure what could be going wrong...
Do I measuare that by sticking a multimeter probe in the coil and then the other probe to ground? I tried that and didn't get anything. I have the...
1947 Dodge WD15, 6 volt positive ground. I've been having trouble with my throttle linkage and thought I might have a decent fix using...
Separate names with a comma.
The Jalopy Journal