The Jalopy Journal
Smart Shoppers Louisville Ky. Produce road. I couldn;t find their site, but I used to buy from them from back in the eighties, when I was doing...
Back in the day, I used nailheads in many projects. Offy and Webber both offered cast aluminum belhousings/adapters for the Buick to std trans....
It is an old TRW forging sold as a 2252a or a 1754p depending on who is selling it. 350 chevy std rod, about 12-1 compression with 64 cc head.
The 2252a and the 1754 are the same piston. High compression 350 chevy with a standard length (5.7) con rod.
In Michigan they will not only issue a warning after 5 sales. They will send a representative to your address on the titles. Had that happen in...
Usually the crack is welded or stitched and a new seat installed along with a cylinder sleeve. Depends on the severity of the crack. Iron stitch...
What do you intend to do with the car? Back in the day, I liked the 4.30. I had a fairly radical big, big block in a 3200 lb car. Drove the car...
No pics, but I have done a couple and extending the frame is the simple remedy. Otherwise it takes a firewall/floorboard mod, later short water...
the bearing should be the same diameter. The difference in the bearings is because the rear cam journal on "early"cams used a flat spot to meter...
I have a 60 Stude flathead six with OD trans for almost free
Numbers mean nothing to the relationship of the rod install. The bearing tangs go to the outside, toward the pan rail, when the piston rod...
I had an older name brand cutter that was getting tired, consumables had to be ordered and getting $$$$. I was producing p-up beds and...
Yes and not only different between the Mark series. GM started changing the blocks/gaskets in the early seventies. Blocking or opening passages...
Your problem will not go away until the gasket problem is corrected.. I ran a 4.375" bore BBC in an Anglia on the street.. This car had a...
PCV valves come in many different vac specs/rates.. A modified engine will take a different valve than the same in a stocker
Separate names with a comma.