The Jalopy Journal
It looks like where the motor mounts sit on the crossmember the "35-40" crossemember sits a couple inches lower than the one in the truck. My fear...
Thanks for clarifying year. So like mentioned do I need taller motor insulators? What vendor sales them as I thought they where all the same
Thanks, i didnt realize they made different size insulators. Any idea which size I would need
I am needing some help, I have a 1941 ford pick up that I am working on getting back on the road and during some upgrades I noticed the front...
Squirrel thank for the information, makes sense why I'm seeing the voltage fluctuate. Ill look into the regulator
So I tested system today while the pump was running. I cut the fuel supply off and then slowly opened it while pump was running. When the shit off...
Ok, so what's the best way to test it? Should I see the voltage drop while tht car is running?
Hope someone can help with some guidance, I purchased a 12v to 6v voltage reducer (the gold one with fin's) to reduce the voltage to my autopulse...
The distributor is a original converted to electronic by Bubbas Distributors. There is no condenser
So I sent my distributor back to Bubba and the control module in the distributor had burned up. He mentioned this would happen if the Ignition was...
It is a stock crab dizzy that I sent to Bubba where he converted it to an electronic dizzy. I did some more checking and I am not getting any...
Separate names with a comma.
The Jalopy Journal