The Jalopy Journal
Welcome, lincolnollie, If you are ever down i Frankurt A.M., my old buddies are still having Cruise Nights every Friday night at McDonalds on...
Owned mine for a little over three years now. Drive it nearly every day from April til December, then it's into the garage for whatever my budget...
Welcome to the HAMB. Used to go to the "Truck-in's" in Gulligen with the Rhein Main Cruisers from Frankfurt, Germany. I was striping cars and...
Try Eastwood Co. (sorry guys) "Rat Rod Black" It's single stage, comes in kit or quarts (kit has 3qts paint, 1 qt hardener). I got the kit pus...
If it's still masked and apart, wet sand with some 1500, go with a couple coats of clear. But blow and tack real good before you spray. If it...
Rear in my 50 Chevy sits 2 1/2 inches forward from center in wheel opening. Someone said maybe flip the springs around to center the axle....
Been striping myself for years. A good Mack brush and some One-Shot will go a long way. I'm using brushes I've had for ten to fifteen years,...
Thanks guys, I got it. I do prefer paint to rust. I'm not always sure if my truck rates "Hot Rod" status. Though it does now have a V8, and will...
Thanks for the welcome. The '50 will be traditional rod, though not too over done. Will be a daily (almost) driver, except for heavy fog and...
After teenage years with no means to really get into rods, finally able to settle down and play catch-up. First real rod was 23 T-bucket (only...
Separate names with a comma.