Register now to get rid of these ads!

BamaMav's Recent Activity

  1. BamaMav replied to the thread Technical Speedometer riddle me this.

    Lots of clusters were still 6 volts up into the 1970’s. They just used a transformer to drop the voltage back down from 12 to 6. Ford...

    Apr 18, 2024 at 7:38 PM
  2. BamaMav replied to the thread Technical Bumper straightening and welding.

    I mailed a front bumper for a 72 Maverick one time. Wrapped some plastic on it, then wrapped it with brown paper and tape. As long as it...

    Apr 18, 2024 at 8:02 AM
  3. BamaMav replied to the thread Hot Rods Let's finish the 50 Chevy pickup.

    If the coil has the resistor built in they are usually marked “ built in resistor “ or “ no resistor needed”. Yes, if there isn’t some...

    Apr 18, 2024 at 7:53 AM
  4. BamaMav replied to the thread Hot Rods The (Mis) adventures of a compulsive tinkerer.

    Bob, I’m afraid that describes a bunch of us, we wish we’d found something or did something a while ago when we were younger. My problem...

    Apr 18, 2024 at 7:47 AM
  5. BamaMav liked Tow Truck Tom's post in the thread Art & Inspiration Amusing car stuff / funny / stories / pics , print / whatcha got.

    :eek: Gene, All of that reminds me of the riddle,,, What is the difference between a Fairy Tale, and a Truck driver's story? Well a...

    Apr 17, 2024 at 8:27 PM
  6. BamaMav replied to the thread Projects de coders needed new ride.

    It looks like the one my old man traded in around the fall of 1966 on a brand new 1967 Custom 500. I was 7 years old so I barely...

    Apr 17, 2024 at 8:14 PM
  7. BamaMav replied to the thread Features HAMBslist.

    My list is not even a snack to most of yall, but at least I was trying! 26-27 T sedan 46 CJ2a 36 Ford pickup, no bed 47-48 Ford coupe 38...

    Apr 16, 2024 at 9:18 AM
  8. BamaMav replied to the thread Folks Of Interest Poor Mark and Cob.

    Cob has it right, it makes a difference how big you are in the electronic sea. My forum, link in signature below, is still very small...

    Apr 16, 2024 at 8:50 AM
  9. BamaMav liked stubbsrodandcustom's post in the thread Technical Anyone use Amazon impact sockets?.

    I haven't had any experience with the impact sockets, but I bought a rail of 10mm sockets and still haven't had one get abducted by the...

    1_oaJlY6rLTVKnCCwrjCItMA.jpg Apr 15, 2024 at 8:20 PM
  10. BamaMav replied to the thread Hot Rods 16 x 4 Wheel Blanks Stamped "Firestone".

    I’m thinking more 9N than 8N. My 8N has a 5 or 6 bolt center, the 9N has a wide 5 type hub IIRC.

    Apr 15, 2024 at 9:17 AM
  11. BamaMav replied to the thread HAMB Spam Attack.

    Glad I slept late…

    Apr 15, 2024 at 9:09 AM
  12. BamaMav replied to the thread Features HAMBslist.

    Is this just drivers, or do parts cars and/or cars that were projects that never seen a roadway under your ownership count? I’ve owned...

    Apr 15, 2024 at 9:01 AM
  13. BamaMav replied to the thread Technical Air shocks?.

    I put a set on a 67 Ford pony car. They were Teed together, filler hid under bumper. It would raise the rear end so high the u joints...

    Apr 15, 2024 at 8:54 AM
  14. BamaMav replied to the thread Technical Is the glove box lock on a tri 5 Chevy the same as the doors and trunk?.

    I knew a guy that had a 56 4 door that had three different keys! Each door was different than the ignition. But it was put together from...

    Apr 14, 2024 at 8:28 AM
  15. BamaMav replied to the thread Vintage key chain thread.

    Neat. Promotional give aways are almost a thing of the past. I’ve got a few key rings around here somewhere, I’ll have to dig them up...

    Apr 13, 2024
Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.