Register now to get rid of these ads!

AndersF's Recent Activity

  1. AndersF liked 26 T Ford RPU's post in the thread Projects Belly Tank Build, NZ..

    Th motor is about the same size a a V8 60 (i34 cid verses 136) and it would only be competitive in the pre 35 block class if i could...

    Jun 18, 2021 at 2:15 PM
  2. AndersF liked 26 T Ford RPU's post in the thread Projects Belly Tank Build, NZ..

    Isn't that always the case and i would say you are right on. At this stage i would like to get close to 150 mph as this is how fast i...

    Jun 18, 2021 at 2:10 AM
  3. AndersF liked johnneilson's post in the thread Projects Belly Tank Build, NZ..

    JW, After you drive it, you will start looking for more speed, trust me. Here's a shot just after a run of 155 a few years ago. Keep up...

    IMG_6778.JPG Jun 18, 2021 at 2:10 AM
  4. AndersF liked modelamotorhead's post in the thread A survivor that I missed once by 10 minutes came home with me Fathers Day weekend.

    [ATTACH] Here's my '32 with a new stable mate, she is lonely no longer! She told me that she really had a "thing" for '35's, so I set...

    082 (3).JPG Jun 17, 2021 at 1:55 AM
  5. AndersF liked Paul's post in the thread Projects '23 Ford Roadster build aka The Incredible Hulk.

    Stepped panel firewall bugged me. Cut the recess out and welded it in to a new flat firewall. [ATTACH] [ATTACH] [ATTACH]

    PXL_20210615_225930980.jpg PXL_20210615_225940492.jpg PXL_20210616_012221998.jpg Jun 16, 2021 at 2:14 AM
  6. AndersF liked 26 T Ford RPU's post in the thread Projects Belly Tank Build, NZ..

    I have had the DuVall head mentioned to me before in another thread and as cool as one would be i will stick with what i have. Back...

    Jun 16, 2021 at 2:09 AM
  7. AndersF liked tricky steve's post in the thread Hot Rods How about some love for the T-Bucket?.

    pic of when I was 15.. LOL dang hippies[ATTACH] This would have been 1976

    filename-1 (1).jpg Jun 15, 2021 at 3:26 PM
  8. AndersF liked johnneilson's post in the thread Projects Belly Tank Build, NZ..

    Make sure to check the record for that engine class, that is what determines the chute requirement. I ended up with a little more...

    IMG_1324 reduced.jpg Jun 15, 2021 at 3:22 PM
  9. AndersF liked JamieUC's post in the thread Projects Belly Tank Build UK.

    Great info Paul, So-Cal tank has been/is a big influence on my build, Alex and the guys who drove this car back in the 50's were very...

    Jun 15, 2021 at 3:21 PM
  10. AndersF liked flynbrian48's post in the thread Customs Wagon hunt may be OVER!!! 1952 DeSoto wagon is HOME!.

    [ATTACH][ATTACH] Today I went out to start pulling the original birch cargo floor in order to replace it, and as I looked in the car,...

    IMG_4126.JPG IMG_4127.JPG Jun 15, 2021 at 1:12 PM
  11. AndersF liked tricky steve's post in the thread Hot Rods How about some love for the T-Bucket?.

    H So here[ATTACH] [ATTACH] [ATTACH] 's my roadster, I started building it when I was 12. My dad taught me about...

    4gth4h.jpg 12065670_1714351472130788_6251455293494729548_n (1).jpg Picture 1067.jpg Jun 15, 2021 at 1:10 PM
  12. AndersF liked Paul's post in the thread Projects '23 Ford Roadster build aka The Incredible Hulk.

    I cut an inch out of the top of the four bar bracket that's welded to the axle to lower the forward rod end. That put the rod end a...

    Jun 15, 2021 at 1:57 AM
  13. AndersF liked Paul's post in the thread Projects '23 Ford Roadster build aka The Incredible Hulk.

    also revisited the seating.. cut some poster board panels and leaned some old plastic chairs in to help visualize a possible style...

    PXL_20210614_204752589.jpg PXL_20210614_204515597.jpg Jun 15, 2021 at 1:57 AM
  14. AndersF liked Paul's post in the thread Projects '23 Ford Roadster build aka The Incredible Hulk.

    little firewall happening here. I welded the recess for the distributor in before running it through the bead roller, of course that...

    PXL_20210615_013301026.jpg PXL_20210615_013840048.jpg PXL_20210615_013859113.jpg Jun 15, 2021 at 1:56 AM
  15. AndersF liked JamieUC's post in the thread Projects Belly Tank Build UK.

    Havent done an update for a bit because I havent done a great deal, been making the most of the relaxing of Covid rules here in Wales,...

    Hamb1.jpg Hamb2.jpg Tank72.jpg Tank71.jpg Jun 14, 2021 at 12:31 AM
Register now to get rid of these ads!

Archive

Copyright © 1995-2021 The Jalopy Journal: Steal our stuff, we'll kick your teeth in. Terms of Service. Privacy Policy.

Atomic Industry
Forum software by XenForo™ ©2010-2014 XenForo Ltd.