The Jalopy Journal
[ATTACH] This should be the one for the arrow switch
Check to make sure you have full voltage to the coil could still be wired through the resistor dropping the voltage in the run side of the switch....
That appears to be a RC50 Sun Tach which requires a EB9A transmitter. If you google RC50 you will find the wiring diagram with the transmitter....
I need to get some of those files in the correct categories. That article is actually under frames I think on the third page. If you open the link...
Here is a link to a tech article on my website that may help it is a docx document so it needs opened in Word or what ever you have to read a...
Been a long time since I rebuilt a Dynaflow but the sequence is remove torque convertor, bell housing, oil pan, valve body, reaction flange and...
Good point although I would think unlikely I played it safe. The fan assembly I used is brush less and the starting capacitor is separate. I...
I installed a momentary switch at the door. The door opens fan goes off, door closes fan turns on. I open the door slow so the fan comes to a stop...
So my new shop is in a perfect location with great neighbors but is way to small for a permanent paint booth. I searched the internet for ideas...
Separate names with a comma.