The Jalopy Journal
Based on the intake manifold that sure looks like a flathead setup. Also exhaust sure looks like a split manifold or an additional center outlet....
That's correct.
It's possible to disconnect the wishbone ball from the bottom of the bellhousing and use a 2 x 4 between the wishbone and oil pan to hold the...
The longer links are used with the Holley 94 style carbs like the Model 2100 that was used into the mid '50's. If you are using the pre-1949...
Check with Charlie Yapp at Secrets of Speed. His Scalded Dog banger speed parts include an "Equalizer" dual manifold that is supposed to work...
To relieve some of your concern I will say that the detonation I have experienced isn't frequent or normal, you have to be careful not to over...
I had the same issue with my repro Winfield head. The combustion chambers are not very accurately located. My solution was to have the head cut...
I believe the 6.8:1 is the crow's foot combustion chamber. I run that head and use NGK BP7HS or NGK BP6HS. The 6HS is a little hotter plug....
Model A tail lamps, full bumper and MG tag light license bracket where spare used to live. [ATTACH] Full bumper and dropped headlight bar with...
Curious if those shock mounts fit under the fenders or if the tops will need to bend or curve outward?
Check out Speedway Motors flathead catalog section for throttle linkage parts. They have some reasonably priced double linkage kits that you can...
Also check out dan4banger.com, (Dan Price) he is selling a finned aluminum 7:1 flathead. Requires a 3-bolt Model B water pump which is also...
I'm running two 94's on a 200 cubic inch four banger. I use straight non-progressive linkage which I assume you will be doing also. I am using...
This is my car I raced when I turned into a sixty year-old kid. [ATTACH]
You may not see a drop in coolant level, but that white smoke means moisture with your combustion. I would recommend re-torquing the head ASAP,...
Separate names with a comma.