The Jalopy Journal
When I converted to a 3G I looked at the Ford wiring diagrams from the cars that used the 3G and installed a MEGA Fuse (Littelfuse trade name) in...
Not sure if this is related, but found it today. York US 30 strip. [ATTACH] Sent from my SM-G960U using The H.A.M.B. mobile app
01T 2455 pedal & bushing assy (brake) Years 40-47 Comm 1942-47 Trucks except COE 1940-47 Green Bible page 55 Sent from my SM-G960U using The...
I had a 318 Dodge truck with an AFB that did the same thing. Turned out to be a bad fuel pump. Apparently would supply enough fuel for light...
My '48 Fordor does not have tube shocks. Relatively low s/n, H series 6 cyl Super Deluxe. Sent from my SM-G960U using The H.A.M.B. mobile app
Have you considered following the L shape of your upper/side trim as a smaller series instead of vertical teeth? Think '47 Olds. Sent from my...
1955 Chilton's instructions. [ATTACH][ATTACH][ATTACH] Sent from my SM-G960U using The H.A.M.B. mobile app
Does the float actually float or does it sink? Sent from my SM-G960U using The H.A.M.B. mobile app
LM7806 voltage regulator works great if you are comfortable with electronics. They cost less than $1. Sent from my SM-G960U using The H.A.M.B....
My OT truck has a parking pass for the public library. Sent from my SM-G900V using The H.A.M.B. mobile app
Considered using studs and nuts? That's what my '48 has from the factory for the head. I have read early production engines used studs. Sent...
I will happily work for the chance to learn. I did not intend to ask for pay.
What I want is an apprenticeship with the "old guys" from this thread. I'm willing to trade labor for the teaching!
The regulator Kevin used should have more current capacity than is needed for just some gauges. I used LM7806 regulators - the 6V version of the...
My experience with automotive wiring has always been OEM and aftermarket fuse panels have two main feeds, one always hot and one hot with the key...
Separate names with a comma.
The Jalopy Journal