The Jalopy Journal
First trip down the 1/4 was at Sears Point in 1986. Did Sacramento Raceway a few times in the 90’s, LACR in the mid 2000’s and last time was...
Agreed about the lost pictures. Makes it tough to establish context. I will try rebuild them as much as possible now that it looks like the site...
Thanks for the contribution Dennis. I have been to Osh a few times but have yet to make it to the seaplane base. Need to fix that next time....
Hi gang. Long time away but wanted to follow- up with a progress report. There has been no progress! That said, the 32 is still safe, still...
Current primary ride is my Harmon Rocket. Ported heads and EFI, the stock 260 HP Lycoming dyno'd at 336HP after rebuild. It's a 1200 pound...
It’s been a long time since I started this thread and am happy to see all the responses. Have been away from the site for a while and didn’t...
I did a 472 (then a 500) into my 68 ElCo with little problem other than the oil pan (built a deep, rear sump example) and a slight rework of the...
68 model from NorCal here. Early teen car lust was VW's, particularly the slammed, Cal Look examples. After the realization that a turbo 2180...
I built a 500 inch Cad for my 68 ElCamino some years ago. Did some creative parts pulling and scored a set of 1970 heads on a 72 short block....
Hi gang, After a long break I'm getting back into my mild custom 70 DeVille and I'm going to need a nice 80/20 loop molded carpet set....
I too live on an airport. My current "rides": [img] [img]
Does not say one way oe the other.... As a Delco unit modified by Maring, it seems unlikely it would be metric. Also, this thing has a trip...
OK, looked a little closer and the coloration is perfectly uniform. If it IS faded, it's not from lighting. Also, after scrubbing off the dirt,...
Anybody got the down low on the dome light and/or bumper guards?
Separate names with a comma.