The Jalopy Journal
I have used Sweets in the past. I found that they developed play after a short use. They are good looking & compact.
It's an 85 hp trans that has been cut to clear the starter on a 60 hp engine. Not uncommon back when.
I used them in the late '50s. 303 Olds street hot rod.
IMO, with correct reach and correct heat range, one plug is as good as another.
How is your health ?
IMO-You won't feel the difference between any of the 4bbl manifolds. Based on using the same carb on each manifold.
"42 Mercury upper, like the man said.
Looks like there is a "safety hub retainer " that was welded in place. That caused the damage when the hub was removed without removing the nuts...
Grade 5 is OK, they are only torqued to 55 lbs.
Challenger, in so-cal on Foothill Blvd.
I like it. Good thinking.
Two things, on the early pump, the push rod cup is smaller, also the mounting flange on the early pump is shorter by 3/8" . Bolt pattern is the...
The Merc has one piece pinion/driveshaft that can be cut & re-splined for the open drive kit. Hot Rod Works can do this. The ratio is most likely...
Specialty wipers on my off topic ride.
Inquiring minds want to know.
Separate names with a comma.